ES32 Staircase Controller for MONO LED Strip with Motion Sensors, Cascading Light, 8 to 32 Steps at 1A each – 32A

Kod produktu: 5903714983490
Towar dostępny
420,00 zł 341,46 zł netto

The controller kit includes two laser motion sensors and a twilight sensor.

Door-to-door warranty as standard – check details

Download user manual

*the controller kit currently includes two EL-C laser motion sensors instead of the PIR sensors shown in the video

*the controller kit currently includes two EL-C laser motion sensors instead of the PIR sensors mentioned in the video

Comparison of a laser motion sensor with a PIR sensor

Precision (narrow angle): The laser reacts only when its line is crossed (±10°). A PIR sensor triggers light accidentally, e.g. when someone merely walks past in the room (+110°).

Range control: On the laser sensor, the detection range can be set between 0.05–2.5 m (e.g., strictly to the width of the stairs). PIR, which works by detecting points warmer than the surroundings, picks up everything within its range (including through an open door).

Discreet appearance: The laser is a flat and nearly invisible lens. PIR requires a large, protruding plastic dome.

Response speed: The laser turns on the light immediately when the beam is broken (delay time can be adjusted). PIR takes slightly longer to trigger the light.

Temperature resistance: The laser always performs the same. PIR relies on body heat – during hot weather it may perform worse, while drafts or radiators can cause false triggers.

Why is a twilight sensor included in the kit?

Thanks to the twilight sensor, the light turns on only when it is dark outside, avoiding unnecessary lighting during the day. If you want the controller to operate during the day or when another lamp is on in the room, you can disconnect it or set a lower detection sensitivity on the controller.

blank

ES32 Staircase Controller – where can it be used?

The ES32 controller is dedicated primarily to lighting stairs (on, off, cascading illumination of steps and handrails); it also works well for illuminating stairwells or passageways where lighting is meant to turn on in a cascade. It operates with MONO (single-color) LED strips.

What does the ES32 controller enable?

Cascading step illumination, meaning the light can turn on step by step, allowing you to create an eye-catching lighting animation – possible applications along with wiring instructions are shown in this video.

Cascading light movement along a wall line, e.g., in a stairwell, hallway, or along a handrail.

Triggering light via a motion sensor or a wall push-button – the controller is a very flexible solution and lets you choose between triggering the lighting animation with sensors, a push-button, or a mixed mode (the most convenient option: pressing the button turns on all lights if needed, and after turning them off it returns to sensor-based activation).

Adjusting brightness and turn-on speed on a scale of 1–8, from a very slow fade-in that stays lit longer to an almost instant response and quick fade-out. From subtle accent light up to full 100% LED strip brightness.

Easy operation thanks to the OLED display and 3 buttons.

OLED screen and button operation

blank
  1. Briefly press the M key to enter the current operating lighting mode parameter settings.
  2. Press and hold the M key for 2 s to enter system parameter settings to switch between the four operating light modes, set the light
    turn-off mode, push-switch input function setting, chip type and RGB order setting, and daylight sensor threshold setting.
  3. In the parameter setting state, briefly press the M key to switch between multiple parameter items,
    press the < or > button to adjust parameters.
  4. Long press the M key or wait 15 seconds to exit the parameter setting state.
  5. Long press M and > keys for 2 s to start testing the upward inductive light direction.
  6. Long press M & < keys for 2 s to start testing the downward inductive light direction.
  7. Long press < and > keys for 2 s to restore factory default parameters.
  8. The fourth line displays the color mode name by default,
    and shows the inductive signal input indication or light on/off status.
  9. After the inductive light control process finishes, the light turns off automatically after 10 seconds.
    For speeds 1–8, the turn-off delay time is 45/40/35/30/25/20/15/10 s respectively.


Specyfikacja techniczna

Kompatybilne taśmy
MONO (jednokolorowa)
Napięcie zasilania
5-24V DC
Moc
1A na kanał
max 32A
Zasilanie
potrzebny zasilacz stało napięciowy dostosowany do napięcia taśmy (w naszym sklepie 24V)
Typ wyjścia:
stałe napięcie + SPI (TTL)
Maksymalna moc dla 5V
160W
Maksymalna moc dla 24V
768W
Temperatura pracy
-30 ℃ ~ + 55 ℃
Temperatura obudowy (max)
+ 85 ℃
Klasa wodoszczelności
IP20
Wymiary
186 mm x 86 mm x 25,5 mm
Gwarancja
5 lat gwarancji Door-to-Door