This is the remote/panel only; a receiver must be purchased separately!

Door-to-door warranty as standard – check details
Panel for LED strip:
– MONO (single-color)
Panel for controlling LED strip lighting
The panel requires a receiver to operate.
Allows you to adjust light intensity and turn it on or off.
Panel functions:
- on / off
- dim / brighten
- DMX512 control
- 1 zone
- wall panel mounted in a Ø60 installation box – powered by 230V
- 256 levels of smooth dimming in the 0-100% range without flicker
- when operating as a DMX512 master, the panel is compatible with a single-zone or multi-zone BLACK series remote control
- when used as an RF remote, the panel can wirelessly control multiple BLACK series LED controllers/receivers
Panel for controlling 1 lighting zone!
Each room / section in a building can be controlled from a single panel – several receivers can be programmed to one zone.

Discover the BLACK series family

The panel requires a second device, which is a receiver. The panel works with receivers:
Pairing instructions (connecting the panel with the receiver and unpairing)

PAIRING and UNPAIRING – there are two options to choose from:
1. Use the controller’s Match key:
Pairing:
- Short-press the match key, then immediately short-press the rotary panel knob.
Unpairing:
- Switch off the receiver power, then switch the power back on.
Immediately short-press the knob on the rotary panel 5 times.
The indicator light will flash 5 times, meaning all matched remotes have been cleared.
2. Use power restart:
Pairing:
- Switch off the receiver power, then switch the power back on.
Immediately short-press the knob on the rotary panel 3 times.
The indicator light will flash 3 times, meaning pairing succeeded.
Unpairing:
- Press and hold the match key for 5 seconds to delete all matches,
The indicator light will flash 5 times, meaning all matched remotes have been cleared.
