Dimmable LED Power Supply 0-10V + Push-Dim for Mono LED Strip 24V 1.65A 40W – LN-40-24 BLACK series

Kod produktu: 5906124004700
Towar dostępny
81,90 zł 66,59 zł netto

Dimmable Power Supply 24V 40W for MONO LED Strips – 0–10V / PUSH-DIM

LN-40-24 BLACK series is a compact 24V DC constant-voltage power supply with 40W output power, designed for powering and adjusting the brightness of single-color MONO LED strips. Thanks to the built-in dimming function, there is no need to install an additional dimmer between the power supply and the LED strip.

The power supply provides smooth brightness adjustment in the 0–100% range and works with popular lighting control systems. It can be controlled via a 0–10V / 1–10V, PWM, Rx signal, as well as via PUSH-DIM using a standard momentary push button (bell push).

One device – power supply and dimming

The LN-40-24 combines the functions of an LED power supply and a dimmer. This solution simplifies installation and reduces the number of devices needed to control lighting.

With PUSH-DIM control, all you need is a momentary push button:

  • short press – turns the light on or off,
  • holding the button – smoothly brightens or dims,
  • another long press – reverses the brightness adjustment direction,
  • built-in memory retains the last set brightness level.

Wide control capabilities

The power supply supports several popular brightness adjustment methods:

0–10V / 1–10V – compatibility with 0–10V dimmers and control panels.

PUSH-DIM – control via a standard momentary push button without needing an additional controller.

PWM / Rx – capability to integrate with other lighting control systems.

The power supply also allows synchronization of multiple units, making it suitable for larger installations with multiple lighting circuits.

For 24V MONO LED strips

The device provides a stabilized output voltage of 24V DC and a maximum output current of 1.67A. Its 40W power rating allows powering LED strips with a total consumption of up to 40W, though leaving an appropriate power reserve is recommended when sizing the power supply. KingLED recommends selecting a power supply with approximately 10% headroom relative to installation demand.

For example, with a strip consuming 10W/m, the power supply can handle up to around 4 m of strip at full power utilization. In practical installations, it is advisable to leave an extra margin.

Safe and durable operation

The LN-40-24 is equipped with protections safeguarding the device and connected lighting against:

  • overload,
  • short circuit,
  • overheating.

The power supply features an IP20 housing and is cooled by free air convection. The declared lifespan of the device exceeds 50,000 hours.

Key advantages

  • 40W output power
  • 24V DC – for MONO LED strips
  • built-in dimming function
  • brightness adjustment 0–100%
  • 0–10V / 1–10V control
  • PUSH-DIM control via momentary push button
  • PWM and Rx support
  • synchronization of multiple power supplies
  • protection against short circuit, overload, and overheating
  • IP20 housing
  • lifespan >50,000 hours
  • compact design
  • 5-year warranty

Applications

The LN-40-24 power supply works anywhere stable 24V LED strip power and convenient brightness control are required. It can be used, among others, in:

  • furniture lighting,
  • kitchens and built-in cabinetry,
  • recesses and ceilings,
  • decorative lighting,
  • service and commercial premises,
  • installations controlled by a 0–10V system,
  • installations with a classic PUSH-DIM momentary push button.

LN-40-24 BLACK series is a practical 2-in-1 solution – a stable 24V power supply and an LED dimmer combined in a single device.

Model LN-40-24
Power supply type Constant Voltage (CV)
Output power 40W
Output voltage 24V DC
Control 0/1-10V
Dimming function Switch Dim
Applications LED strips, LED installations, decorative lighting, lighting control systems
Technology Constant-voltage LED power supply

Specyfikacja techniczna:

Napięcie wejściowe:
100-240VAC
Moc wyjściowa:
40W
Prąd wyjściowy:
1,65A
Typ zasilacza:
stałonapięciowy (CV)
Ilość kanałów:
1
Zakres ściemniania:
0-100%
Sposób ściemniania:
0/1-10V / PUSH-DIM
Zastosowanie:
taśmy LED MONO 24V
Stopień ochrony:
IP20
Chłodzenie:
swobodnym obiegiem powietrza
Zabezpieczenia:
przeciążenie / zwarcie / przegrzanie
Temperatura pracy:
-20°C ÷ 50°C
Wymiary:
168,5 × 44 × 30 mm
Gwarancja:
5 lat