RGBW +4000K LED Strip 60 SMD 19W CRI>90 LACQUERED Waterproof IP54 24V zoomLED®

Kod produktu: 24-120601962+NANO
Towar dostępny
49,86 zł 40,54 zł netto

Price is for 1 linear meter – the strip is sold in multiples of 1 meter. Factory roll length is 10m. You can order strip soldering to connect segments and achieve any length.

The strip is protected against moisture with NANO lacquer. After cutting the strip, connection points must be additionally sealed, e.g., with heat-shrink tubing.

Pobierz instrukcję montażu

Door-to-door warranty as standard – check details

Badge showing LED strip warranty

5-YEAR WARRANTY on zoomLED® strips

The zoomLED® lighting brand stands for professional products that guarantee trouble-free operation for many years, backed by a 5-year warranty (also for commercial facilities)!

IP54 Waterproof Strip – No Gel, with NANO Coating

Gel is bad for an LED strip. Gel turns yellow over time, so eventually it alters the light color of the LED strip. Gel traps heat inside the strip, causing LEDs to degrade faster. Gel has its own tint, altering the light color right from the start. But we have NANO TECHNOLOGY! It is a modern protective coating—a special lacquer that thoroughly coats the entire surface of the LED strip, protecting it against water. The NANO coating is a thin layer of lacquer that does not alter the light color, does not yellow, and does not trap heat on the strip.

LED Strip 19W RGBW 24V 4000K
LED Strip RGBW 24V 4000K
LED Strip RGBW 24V 4000K
blank

RGBW LED Strip – All Light Colors + 4000K White Diode

The RGBW LED strip features an RGB LED diode emitting light in any color, plus a 4000K white (W) diode. Using a controller, you can set any light color.

How the human eye perceives light

Beautiful surrounding colors – high color rendering index CRI (RA) 90+ from the 4000K white (W) diode

Sunlight renders surrounding colors perfectly, so it scores 100/100 on the CRI (RA) scale.

zoomLED® strips emit light with a CRI (RA) above 90, meaning they render true surrounding colors in a way very close to natural sunlight.

Most LED strips emit light with a CRI (RA) between 60 and 80 – which unnaturally distorts the colors of the surroundings.

A high RA matters not only for how attractive a room looks, but also for health, because the human eye tires and dries out quickly under artificial light with a low RA.

zoomLED 24V RGBW LED strip
zoomLED 24V RGBW LED strip

Uniform light color along the entire length – same BIN

Uniform light color is a concept referring to the consistency and homogeneity of the color emitted by a light source.

In the case of the zoomLED® strip, uniform light color means that all LEDs on the strip emit light of the exact same color, without visible differences in shade or color saturation (they belong to the same BIN, i.e., sorted to the exact same color).

In practice, this means that an LED strip with uniform light color does not cause “spotting” or “discoloration” effects when perceived by the human eye.

Comparison of light output from a zoomLED strip vs. another strip

More light from the same power

The zoomLED® LED strip emits more light with lower power consumption.

zoomLED® 120 LED 10W strip – 106lm/1W

Another manufacturer’s 120 LED 10W strip – ~60lm/1W

Luminous efficacy is measured in lumens per watt (lm/W), and the higher this value, the better quality lighting can be achieved with lower energy consumption. So zoomLED® strips deliver significantly more light than others!

One of the tests conducted during lighting production

LED strip quality backed by photometric testing

We have our own photometric laboratory where we test every batch of LED strip, ensuring that we deliver consistent, top product quality every single time.

In our laboratory, we test parameters such as:

luminous efficacy, color temperature, color rendering index, flickering, electrical potential differences, product heating, and we verify the weight of the copper traces.

Example of LED strip installation with a controller and power supply

24V supply voltage – loads of benefits

A 24V LED strip carries lower current than a 12V strip. As a result, there is less thermal load on the strip, generating less heat, and less heat means a longer LED lifespan.

24V power also means smaller voltage drops along the strip, allowing you to create longer runs of light. An additional and very helpful advantage is that controllers used to control 24V LED strips require 2x less current capacity.

To connect an LED strip you need:

1. Power supply (device required for the LED strip to operate)
2. Controller (not required, but allows you to control the light)

*Remember to exercise caution when connecting electrical devices and make sure you have the appropriate skills and knowledge to do so safely. If you have any doubts, consult a professional or electrician.

blank

What light colors can be achieved with the 4000K RGBW LED strip?

RGBW 4000K LED strips are LED strips that can emit light in various colors as well as a color temperature of approx. 4000K. Any light color can be achieved because the strip consists of three LEDs: red, green, and blue, emitting red, green, and blue light respectively. Light with a color temperature of approx. 4000K can also be obtained because the strip includes an additional white LED diode with a color temperature of approx. 4000K. This makes it possible to achieve various shades of approx. 4000K white light, as well as other colors created by mixing those three primary colors.

How to choose a power supply for an LED strip?

1. check how many Watts the LED strip consumes per 1m
2. multiply the number of meters you are installing × the LED strip wattage
example: 7 meters of 20W LED strip – you need at least a 140W power supply (the power supply can be larger, but must not be smaller)
3. choose a larger power supply, never smaller than you need

Still the same light after several years

The light output of this strip does not noticeably fade over time, and the light color does not shift in shade. Because the product is built with branded, carefully selected LEDs that are effectively regulated by precisely matched resistors, the zoomLED® strip retains its properties for years. The LEDs in this strip could run at a much higher luminous output than set, but thanks to the resistors limiting power at each diode, the LEDs are not pushed to the maximum of their capabilities.

Good heat distribution extends lifespan

Thanks to a double-layer PCB substrate and thick copper traces running through the zoomLED® strip, the heat generated during operation does not remain directly on the LED diode, but is distributed across the entire surface of the strip and then transferred to the mounting surface onto which the strip is adhered—ideally aluminum, as it dissipates heat excellently. The lower the operating temperature of the LED strip, the longer its lifespan. In addition to good heat dissipation, the thick copper traces ensure uniform distribution of supply voltage to the LEDs along the entire length of the strip.

24V power supply brings loads of benefits

A 24V LED strip carries lower current than a 12V strip. As a result, there is less thermal load on the strip, generating less heat, and less heat means a longer LED lifespan. 24V power also means smaller voltage drops along the strip, allowing you to create longer runs of light. An additional and very helpful advantage is that controllers used to control 24V LED strips require 2x less current capacity!

Excellent adhesion to the surface

The zoomLED® strip is backed with branded 3M adhesive tape, guaranteeing strong and durable bonding to the surface (the surface must be smooth and degreased). 

RGBW 4in1 LED Strip (RGB +4000K)

This is a strip that packs 4 smaller 4-in-1 diodes inside one larger LED chip. The offered strip is an RGBW strip with a 4000K LED diode. A single chip houses red, green, blue, yellow, and 4000K white light diodes. A standard RGB LED strip (not RGBW) only has color diodes without a separate white diode, so it cannot produce pure white light because mixing colors does not yield true white; thanks to the additional white diode in an RGBW strip, you can achieve genuine white light. With an RGBW strip, you can set white light and also mix red, green, and blue to produce any color. When setting colors, a very interesting option is mixing the white diode with colors to create beautiful pastel shades of light.

Where is an RGBW strip used?

Most often, an RGBW strip is installed in a suspended ceiling, illuminating the entire room and creating an amazing play of light. It is not limited to suspended ceilings, as the strip is increasingly mounted on a cornice, which serves as an alternative to a suspended ceiling. The strip is mounted facing the ceiling, and its reflected light reaches every corner of the room evenly; reflected light is soft light, very pleasant to the eyes and glare-free.

How to change colors on an RGBW strip?

Every LED strip requires a power supply to operate, and color-changing strips also require a controller. A controller can be a remote control, a wall panel, or a smartphone app. The choice depends on the user’s preferences: you can choose just a remote control, or you can control via all methods simultaneously—meaning the same strip can be controlled from a remote one moment and from your smartphone via an app the next; the control system is very flexible and options can be combined.

Downloads

Download CE file
Download LED strip installation manual 

Price is for 1 linear meter – the strip is sold by the meter. Strips can be connected together.

RGBW strip – with color control + 4000K white light.

The strip has an IP54 protection rating – it is resistant to water vapor and light splashes. It is not recommended for use without protection in the form of a profile with a cover in areas exposed to prolonged contact with water. In particularly exposed areas (e.g., showers), we recommend using an IP65 strip along with an IP67 sealed profile or a ready-made IP68 waterproof luminaire.


Specyfikacja

Pobór mocy
19W/ 1m
Napięcie
24V DC
Diody
SMD RGBW LED
Ilość diod
60 LED/ 1m
Wskaźnik oddawania barw (CRI)
RA ≥ 90
Jednolita barwa światła
3 kroki MacAdama
Stopień ochrony IP
IP54
Możliwość cięcia
co 10cm
Szerokość taśmy
12mm
Fabryczna długość rolki
10 mb
Grubość podkładu PCB
2 warstwy
Ścieżki zasilające wykonane z miedzi
2oz (uncje)
Podkład
biały laminat
Od spodu
samoprzylepna taśma klejąca 3M
Rodzaj przewodu startowego
5 żyłowy o długości 15cm
Żywotność
50 000 godzin świecenia
Współczynnik strumienia świetlnego po 50 000 godzin świecenia
L70 @ 50 000h po 50 000 godzinach pracy dioda LED emituje 70% swojej pierwotnej ilości światła.
Możliwość regulacji natężenia światła
tak, za pomocą sterowników
Certyfikat
CE, RoHs, cULus USA
certyfikat cULus jest znakiem jakości i bezpieczeństwa nadawanym przez renomowaną organizację Underwriters Laboratories (UL)
Gwarancja
5 lat gwarancji Door-to-Door

Warunki gwarancji

Odpowiedni zasilacz
taśma LED musi być zasilana zasilaczem z przeznaczonym do oświetlenia LED
Odprowadzanie ciepła
taśma LED musi być przyklejona do aluminiowego profilu, który odprowadza ciepło

Urządzenia działające z taśmą LED

Zasilacz
urządzenie niezbędne do działania taśmy LED
zasilacz do taśmy LED przekształca prąd zmienny z gniazdka (230 V) na stabilny prąd stały o odpowiednim napięciu (24V), zapewniając bezpieczne i prawidłowe działanie taśmy LED
Sterownik
sterownik jest niezbędny do działania taśmy, umożliwia zmianę kolorów i natężenia światła
montowany między zasilaczem a taśmą LED
sterownik może się łączyć z pilotem/ panelem ściennym/ aplikacją w telefonie

Jak dobrać zasilacz do taśmy LED?

1. Sprawdź ile Wat pobiera taśma LED na 1m
2. Pomnóż ilość metrów, które montujesz x ilość Watów pobieranych z 1m taśmy LED
3. Dodaj zapas min 10%
Przykład: 7 metrów taśmy LED o mocy 19W - potrzebujesz minimum zasilacz 133W + 10%