The 12V touch switch with dimming function is used for touch-operated switching on/off and brightness adjustment of LED lighting.
Technical parameters:
- operating voltage: 12V
- Maximum load current: 3A
- Maximum load power: 36W
- IP rating: IP20
- Protection class III
Switching and adjustment operation:
- first short touch (~1 sec.) turns on the receiver – LED lighting returns to the brightness level set before turning off
- second short touch (~1 sec.) turns off the LED lighting receiver
- first long touch – brightening adjustment 20% – 100%
- second long touch – dimming adjustment 100% – 20%
Switch installation instructions:
- Mark the mounting location
- drill a 20 mm diameter hole in the mounting surface
- route the wiring and make the electrical connection
Electrical connection instructions for the switch
- The switch has 3 connection wires:
- connect the negative supply voltage to the black wire of the touch switch
- connect the positive supply voltage and the positive terminal of the LED load to the red wire of the switch
- connect the negative terminal of the LED load to the white wire of the switch
- Insert the switch into the previously prepared mounting hole
- Turn on the 12V power supply

