Pobierz deklarację zgodności CE
Price per 1 linear meter – the rustication profile set with matching cable channel is sold in multiples of 1 meter. The product can be purchased in any number of meters. The factory length of a single rustication profile section is 3m, and the cable channel length is 2m.
Two-part mounting kit designed specifically for installing the hermetic AQU LED luminaire in building thermal insulation systems
The set consists of a rustication profile (20×20 mm) and a matching cable channel. It allows you to create a precisely straight groove (rustication) in the thermal insulation layer, safely conceal the wiring, and aesthetically recess the AQU LED fixture into the wall. As a result, you achieve a modern, minimalist line of light perfectly flush with the facade plaster surface.
Key advantages
- 2-in-1 Set: The mounting profile and cable profile are perfectly matched to the dimensions of the hermetic AQU luminaire.
- Flawless result: Guarantees perfectly straight, crisp lines on the facade and protects plaster edges from chipping.
- Durability for years: Made of rigid PVC – completely resistant to weather conditions, water, and UV radiation.
- Speed and savings: Installation with a prefabricated profile is much cheaper and faster than traditional manual rustication.
What is needed to create a complete lighting system?
The presented product is a technical mounting kit (PVC profiles) that forms the base for a lighting installation. The kit does not include electrical components or a light source.
To create a working and complete light line on the facade, in addition to this profile you will need:
- AQU LED Luminaire – a dedicated, hermetic lamp that fits the dimensions of this profile perfectly (available separately).
- LED Power Supply – appropriately selected in terms of power, voltage (24V), and IP protection rating to power the entire line.
- Controller / Dimmer – optionally, if you plan to adjust light intensity or integrate the lighting with a home/building automation system.
- Power cables – for safe routing inside the cable channel included in the kit.
Quick installation guide
- Preparation: Cut a groove in the polystyrene or mineral wool at least 10 mm larger than the profile dimensions (in polystyrene using a hot-wire cutter, in mineral wool by milling).
- Bonding: Use exclusively fiberglass mesh embedding adhesive. Apply it under the entire surface of the profile (underneath, on the sides, and on the perforated wings). Do not use foam or spot bonding.
- Installation: Place the cable channel inside the embedded profile, route the wires, and mount the hermetic AQU LED luminaire.

