ProSeal N80066 Silicone
A universal, transparent silicone sealant is a single-component compound that cures at room temperature and provides complete waterproofing.
Bonds, seals, and insulates. Withstands temperatures from -54°C to 204°C in continuous operation and up to 260°C in intermittent operation. Resistant to weather conditions, aging, and shrinkage. Provides a waterproof seal and remains flexible. For bonding and sealing glass, metal, leather, vinyl, and rubber. Repairing cracked wires. Sealing lamps, electrical cables, and glass panes.
Exhibits excellent adhesion to sealed surfaces and high pressure resistance.
Product advantages:
- Sensor-safe
- Superior adhesion and flexibility
- Serves as a substitute for most classic (cut) gaskets
- Can be used as a standalone seal or as a sealant for classic gaskets
Directions for use:
For making standalone seals (application to one non-removable surface):
- Remove old material from the mating surfaces.
- Clean and dry all surfaces using a solvent.
- Cut the applicator nozzle so the extruded silicone bead is 1.5 to 6 mm wide. A 3 mm bead is usually sufficient for most applications.
- Apply a continuous, even bead of silicone to one surface, starting from the inside surface of the joint and then around all adjacent bolt holes.
- Wait about 15 minutes for initial (surface) skinning and assemble all parts. 6. Full cure occurs after about 24 hours depending on temperature and air humidity.
For use as a sealant for classic gaskets (application to both sides of the gasket):
- Follow steps 1-4 above.
- Place the pre-cut gasket onto the silicone layer.
- Apply a second thin layer of silicone onto the surface of the installed gasket.
- Wait about 15 minutes and assemble all components.
Net weight: 85 g
